Non-Abrasive Grip Kit (26-Pieces)

Getting a grip on the little things in life has always been easier said than done—until now. Introducing the Grip Kit, 26 individual, pre-cut grips designed to give you an extra layer of grip on the small things you pick up every day, including wireless earbuds, contact lens cases, pill bottles, phone chargers, outdoor sporting gear, hearing aids, and so much more. Just peel, stick, and get a grip.

Includes

• Twenty-six (26) pre-cut, adhesive grip strips in seven (7) sizes:
• Six (6) 25 mm x 5 mm strips
• Four (4) 50 mm x 7.5 mm strips
• Four (4) 25 mm x 25 mm strips
• Four (4) 50 mm x 12.5 mm strips
• Four (4) 100 mm x 12.5 mm strips
• Two (2) 50 mm x 25 mm strips
• Two (2) 50 mm x 50 mm strips

Features

• Designed to add extra grip, safety, and stability to almost any surface
• Made to adhere to any slippery surface without interfering with wireless chargers or magnetic mounts
• Non-abrasive material won’t leave behind any sticky residue or scratch your furniture, floor, or car
• Waterproof—great for applying to outdoor items, or securing racks in your bathtub or shower
• 100% allergy-free, made to not irritate your skin when you touch it
• Eco-friendly and recyclable
• Made with HDPE plastic, a lightweight, flexible, strong, high-density polyethylene plastic whose grip is superior to rubber and latex

How to Use

• How to apply:
• Step 1: Prepare the surface
• Clean the area where you will apply the grip strip
• Use a mild cleaner or rubbing alcohol to remove dirt, oils, or residues
• Allow the surface to dry completely before application
• Tip: A clean, dry surface ensures the best adhesion
• Step 2: Measure and cut (if needed)
• Strip can be cut to size with standard scissors or a utility knife
• Measure the space where you want to apply it and cut accordingly
• Round the corners slightly if you want extra durability (sharp corners can lift more easily over time)
• Step 3: Peel
• Carefully peel off the backing from the adhesive side
• Avoid touching the sticky side too much to maintain strong adhesion
• Step 4: Stick
• Place the adhesive side onto your desired surface
• Press firmly, smoothing out any air bubbles
• Apply even pressure across the entire strip to ensure a secure bond
• Step 5: Cure (optional for best results)
• If possible, allow the strip to set undisturbed for several hours to maximize adhesion strength
• Light pressure (like a book or heavy object) can help it bond even more securely
• How to remove:
• While these grip strips are designed to stick securely, they can be removed when needed with minimal effort
• Step 1: Start at a corner
• Use your fingernail or a plastic scraper (like a credit card) to gently lift one corner of the material
• Tip: Avoid using sharp tools like metal blades, which could damage the underlying surface
• Step 2: Peel slowly
• Once you have a corner lifted, slowly peel the strip back at a low angle (close to the surface)
• Peel steadily to minimize any adhesive residue being left behind
• Step 3: Remove adhesive residue (if any)
• If a small amount of adhesive remains, use a soft cloth and gentle adhesive remover or rubbing alcohol
• Lightly rub the area until the residue is gone
• Wipe clean with water and dry the surface afterward
• Step 4: Clean and restore surface
• After removal and cleaning, your surface should be back to normal with no damage
• If you're applying a new strip, make sure the surface is fully clean and dry before reapplying

About the Brand

CatTongue Grips non-slip products add a layer of safety to your home by helping prevent slips, trips, and falls—without damaging surfaces or skin. From bathroom floors to handheld tools, our patented grip technology keeps items in place and accidents at bay, protecting both your loved ones and your belongings.